Maintenance And Cleaning - Colibri Pump 750 Instrucciones De Uso

Remedy of faults
Malfunction
The unit is not operating
Insufficient delivery rate
Unit switches off after a short running period
Wear parts
The impeller unit is a wearing part and does not fall under the warranty.

Maintenance and cleaning

Attention! Dangerous electrical voltage.
Possible consequences: Death or severe injury.
Protective measures:
 Prior to reaching into the water, disconnect the power supply to all units used in the water.
 Disconnect the power plug prior to carrying out work on the unit.
Cleaning the filter housing
If necessary, clean the unit with clear water using a soft brush.
 Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface or impair the
function.
Cleaning the pump
1.
How to proceed:
0.
 G
Unscrew the transition piece (with telescopic extension or stepped hose adapter) from the pump.
Actuate the engagement hooks on the filter housing and open the filter housing.
Unscrew the pump lid by turning counter-clockwise and remove (bayonet closure).
Pull out the impeller unit (magnetic resistance).
Rinse all parts.
Reassemble the unit in the reverse order.
Storage/Over-wintering
Remove the unit at temperatures below zero degrees centigrade. Thoroughly clean the unit, check for damage and
store immersed in water in a frost-free environment. Do not immerse the plug!
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.
Guarantee conditions
Colibri grants a 3 year guarantee from the date of sale on proven material and manufacturing faults. Prerequisite for
our guarantee is the presentation of the purchase receipt. Our guarantee will become null and void if the unit is mis-
used, electrically or mechanically damaged by inappropriate use and improper repair by non-authorised workshops.
Repairs are reserved for workshops authorised by Colibri or by Colibri itself. In the case of warranty claims, please
return the defective unit or part freight paid to Colibri together with a description of the fault and the purchase receipt.
Colibri reserves the right to invoice repair costs. Colibri is not liable for transport damage. Any damage must be
claimed against the carrier. Further claims of whatever type, especially consequential damage, are excluded. This
guarantee does not affect the final customer's claims against the dealer.
Cause
No mains voltage
Impeller blocked
Strainer casing clogged
Excessive pressure losses in the hoses
Water temperature too high
Remedy
Check mains voltage
Clean impeller
Clean strainer casing
Reduce hose length and connecting parts to a
minimum, route hoses as straight as possible
Note maximum water temperature of +35 °C
- GB -
11