König HAV-IR20 Manual De Uso página 12

Table 2.4.4
IP Setting
IP Source
Select [IP Source] and then press
[ENTER/OK]
IP Setting
IP Source
TCP/IP
DNS
Select [TCP/IP] and press [ENTER/OK]
button
NOTE: When IP setting value (including IP, Subnet Mask, or Gateway) is illegal, IP setting will change
to default value.
2.4.5 Inputting DNS
1. Then scroll up/down to [Network] and press ENTER/OK button.
2. Scroll up/down to [IP Setting] and then press ENTER/OK button to enter.
3. Select [DNS] and then press ENTER/OK button.
4. Press UP/DOWN button to change characters, then press LEFT/RIGHT button to shift.
5. After finishing, press ENTER/OK button to confirm.
Dynamic IP Source
→
TCP/IP
DNS
Static IP
→
> Mask
> GW
Press [ENTER/OK] button to start key in.
Use UP/DOWN (or numbered key) then
TCP/IP
The IP Setting Value is
illegal ! Setting is
Changed to Default !
12
IP Setting
Manual
Switch to [Manual]
TCP/IP
1 9 2 . 1 6 9 . 0 0 1 . 1 0 0
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
1 9 2 . 1 6 9 . 0 0 1 . 2 5 4
LEFT/RIGHT to input IP.
>
>