First Start - Imit WPT V Manual De Instrucciones

FIRST START

Setting the clock (Fig.6)
• Set the 24H or 12H by ▲▼then OK.
• Set the hours by ▲▼then OK.
• Set the minutes by ▲▼then OK.
• Set the day of the week by ◄► then OK.
The device switches to OFF mode.
OFF MODE (Fig.7)
The display shows OFF and the clock, the anti-frost function is active.
Press Mode to browse active modes (Manual Comfort, Manual Economy, Automatic mode).
Press Esc to switch between active modes and OFF.
MANUAL MODE (Fig.8)
Press ▲ or ▼ to change and save the temperature set-points:
MAN = Comfort temperature.
MAN ECO = Economy temperature.
AUTOMATIC MODE (Fig.9)
The set-point temperature (t1, t2, t3) depends on the saved time program and changes automatically along
the day.
TIME PROGRAM (Fig.10)
Press Prog, the display shows the set temperature updated at the current half-hour, PROG flashes.
Press OK to select t1, t2 or t3.
Manuale WPT multilingue interno.indd 10 19/11/15 15:57