Party Light & Sound PARTY-8COMB Manual De Uso página 3

EN
1. PRIOR to using the unit for the first time, please charge fully the battery
2. Charge the battery regularly after each use. Don't wait until it is discharged!
3. DON'T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or
even be totally damaged!
If the voltage becomes too low, the internal circuits are not powered anymore and it will become
impossible to recharge the battery!
4. If you don't use the unit for a longer period of time, it is recommended to charge it at 40% of
its capacity and check/charge it once per month.
We cannot be held responsible for damaged batteries further to the non-observance of these
Location of Controls
1. [POWER] : Power speaker ON/OFF
2. The LED screen: show the playing mode of the speaker
3. USB stick input
4. TF card input
5. [MIC IN]:6.5mm Microphone Input Jack
6. [AUX IN]:3.5mm Auxiliary Audio Input Jack
7. [LED] : Turns the upper Derby light effect ON/OFF
8. [VOLUME]:Speaker Volume Knob
9. Micro USB Charging Port
10. [INDICATOR]:Charging LED Indicator
11. [MODE]: Switch input mode (Bluetooth, Aux in,USB, TF )
12. []:Press to select previous song
13. [▶]:Press to play / pause song
14. []:Press to select next song
15. [LED]: Turns the speaker LED lights ON/OFF
16. [PLAY MODE]: Select among repeat one song, all songs or random play
17. [ECHO]:Mic Echo Knob
18. [VOL MIC]:Mic Volume Knob
Using the speaker
Flip the on/off switch to the ON position to switch the speaker on. A tone will be heard, and the speaker will
enter into Bluetooth pairing mode. The speaker will automatically re-connect to any nearby, previously-paired
device when the Bluetooth function is enabled. Flip the on/off switch to the OFF position to switch the speaker
off.
Playing Music
To play music, you must be connected to a Bluetooth-enabled device or connected via an AUX cable (See the
chapters "Bluetooth Pairing" and "Use with a Wired Device" of this user manual). Once connected, audio play-
back and volume adjustment can be controlled via your paired media-playing device.
Bluetooth Pairing
1. Power the speaker ON. A voice prompt "Power On" will be heard and the LED display will show BLUE.
2. Enable the Bluetooth search function on your mobile device. Select "PARTY-COMBI" in the list of found de-
vices.
3. After successful pairing, a voice prompt will say " Bluetooth device is connected successfully".
Use with Wired Device
Insert one connector of a 3.5 mm auxiliary cable into the 3.5mm auxiliary input port on the back of the speaker.
Insert the other connector into the headphone jack of your media-playing device.
Press the mode button
The LED screen will show AUX. Now you can use the controls on your connected device for playback and volume
adjustment
IMPORTANT NOTE ON LITHIUM-ION BATTERIES
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
basic rules.
1
9
10
2
3
7
PARTY-8COMBI
8
11
12
13
14
15
16
4
5
6
17
18
3