Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Philips head screwdriver (+)
Nipper pliers
14mm wrench
6mm nut driver
6mm wrench
Hex key
Parts needed
Natural gas conversion kit Part Number 710-0778A.
Natural gas orifices (included with your grill packet)
The conversion kit includes:
Natural gas regulator
10 ft (3.0 m) Natural gas hose with quick connector
13.78" (350 mm) Natural gas regulator hose
6 mm nut driver
6 mm wrench
Orifice Chart
The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming from each
orifice varies in order to create the BTU's. The holes in the orifices themselves are drilled to different sizes so as to allow the
proper amount of gas to flow through them. Please refer to your grill's manual for specific instructions or contact customer
service for information at
4
Tools and Parts for Gas Conversion
1-800-913-8999.
IMPORTANT:
Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the
gas supply to the appliance prior to disconnecting the
electrical power.
If there are damaged or missing parts when you unpack
this kit, call 1-800-913-8999. DO NOT have your
QUALIFIED GAS TECHNICIAN attempt to install this kit
until you receive replacement for any damaged or missing
parts.
Publicidad
Tabla de contenido
