Natural Gas Conversion - Nexgrill EVOLUTION INFRARED PLUS 720-0882A Guia De Instalacion

Natural Gas Conversion for Model# 720/730-0882A
NG Conversion Kit 710-0778A for Model #
WARNING! FAILURE TO HEED THESE WARNINGS COULD RESULT IN A FIRE OR EXPLOSION THAT
COULD CAUSE SERIOUS BODILY INJURY, DEATH OR PROPERTY DAMAGE.
Installation of this Natural Gas Conversion kit must be performed by a QUALIFIED GAS TECHNICIAN ONLY.
DO NOT ATTEMPT TO INSTALL THIS KIT YOURSELF. Improper installation could result in a gas leak which
could cause a fire or explosion and cause serious bodily injury, death or property damage. Leaks due to improper
installation could occur immediately or slowly over time. If you hear any unusual noises or leaks, smell gas or
unusual odors, or notice anything unusual with the operation of your gas appliance after the installation,
immediately shut off the gas supply and discontinue use until the appliance is repaired by a QUALIFIED GAS
TECHNICIAN.
If there are damaged or missing parts when you unpack this kit, call 1-800-913-8999. DO NOT have your
QUALIFIED GAS TECHNICIAN attempt to install this kit until you receive replacement for any damaged or
missing parts.
Orifice Chart
The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming
from each orifice varies in order to create the BTU's. The holes in the orifices themselves are drilled to different
sizes so as to allow the proper amount of gas to flow through them. Please note the chart below as an easy
reference for the various orifice opening sizes for the different valves in the grill.
Components
Main Burner
Side Burner
Below tools are included in NG Conversion Kit 710-0778A:
Parts supplied
Natural gas orifices
Natural gas regulator 4" W.C. (marked "Natural Gas
Regulator")
10 ft (3.0 m) Natural gas hose with quick connector
13.78" (350 mm) Natural gas regulator hose
6 mm nut driver
6 mm wrench
Hex key
720-0882A,730-0882A orifice size
Liquid Propane (LP)
Orifice Size
0.88mm
1.02mm
720/730-0882A
BTU Orifice Size
9,000 1.46mm
12,000 1.70mm
Tools that will be needed for installation:
19
Natural Gas (NG)
BTU
9,000
12,000
6mm