Orbegozo CTP 1815 Manual De Instrucciones página 23

CTP 1815
NOTE: both combs can be adjusted in different length of cut by different adjustable
positions. For getting used with this hair clipper, we advise you to start with long
length.
TECHNICAL SPECIFICATION
Rated Voltage: 220-240V~ 50Hz
Charging Time: 8 hours
HOW TO USE
1. This hair clipper can be used with or without cord.
2. Connect the adaptor to charging connection on bottom side of the appliance, after
plug the adaptor to the mains. Indicator light will light in red and the battery will
charge. You also can charge the hair clipper placing on the charging base and
connecting the adaptor to the base. For full charging it needs 8 hours, after that it can
be used for more than 45 minutes.
3. Turn on the appliance with ON/OFF switch, slice it up to switch on, switch will
show ON and indicator light will light in green. Slice it down to switch off, it will
show OFF in the switch and indicator light will turn off.
4. Indicator light will light orange while you use the appliance connected to adaptor.
USING OF ACCESSORIES
When you mount or dismount the combs, the appliance should be switch off.
1. Place the comb facing its rail guide and rail guide of hair clipper. See below pic.
23