REMEMBER! When using the device, protect children
and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/ or knowledge unless they are supervised by
a person responsible for their safety or they have
received instructions on how to operate the device.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration
whilst using the device may lead to serious injuries.
d)
To prevent the device from accidentally switching
on, make sure the switch is in the OFF position
before connecting to a power source.
e)
The device is not a toy. Children should be supervised
so that they will not play with the device.
f)
Note: The metal parts of the lid and the housing may
be hot and may cause burns
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device,
who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
c)
Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
It is forbidden to move, adjusting and rotating the
device in the course of work.
h)
Clean the device regularly to avoid a durable
encrustation of dirt.
i)
It is forbidden to move the appliance when it is filled
with hot oil! The oil can maintain a high temperature
even for 6-7h.
j)
Do not turn the device upside down, it may cause
damage to it.
k)
Do not turn on the appliance if the container is not
filled with oil.
ATTENTION! Despite the safe design of the device
and its protection facilities and despite the use of
additional elements protecting the operator, there is
still a slight risk of an accident or injury when using
the device. When using the device stay alert and use
common sense.
8
3. USE GUIDELINES
This appliance is intended for deep frying of food.
The user is liable for any damage resulting from non-
intended use of the device.
3.1. DEVICE DESCRIPTION
RCBG-18STHB
1
2
3
4
7
8
6
5
9
RCBG-30STHB
5
8
10 7
6
2
3
1
4
9
1.
Oil container
2.
Frying basket
3.
Shelf
4.
Lid
5.
Temperature control knob
6.
LED: Heat On
7.
LED: Power On
8.
"Reset" button
9.
Drain tap
10.
On/Off button
3.2. PREPARING FOR USE
Appliance location
The temperature of the environment must not be higher
than 40°C and the relative humidity should be less than
85%. Ensure good ventilation in the room in which the
device is used. The distance between each side of the
device and the wall or other objects should be at least 10
cm. Keep the device away from hot surfaces. Operate the
device on flat, stable, clean, fire-proof and dry surfaces out
of the reach of children and people with mental disabilities.
Install the device making sure that constant access to the
main plug is ensured. The power cord connected to the
appliance must be properly grounded and correspond to
the technical details!
Before first use, remove all components and clean them
along with the entire device.
Installing the appliance (RCBG-30STHB only)
Connection to the power supply can only be performed
by
personnel
with
appropriate
authorisation
qualifications.
Rev. 03.10.2018
3.3. DEVICE USE
1.
Fill the tanks with oil so that level is between the
marks of minimum and maximum level. To avoid
damaging the thermostat use only oil or liquid fat.
It is not recommended to fill the container with solid
fats- such fats should be pre-melted.
2.
Set the temperature control knob (thermostat) to "0"
and connect the plug to an electrical outlet. Green
LED will light up.
3.
RCBG-30STHB only: switch on the appliance by
setting the On/Off button to "On".
4.
Set the desired temperature to which the appliance
will heat the oil, the orange LED lights up. After the
desired temperature is reached, the LED goes out.
Now you can start frying the food. The thermostat
maintains the desired temperature by automatically
turning the heating element on or off.
5.
Insert the product intended for frying into the frying
basket, and then immerse the filled basket in oil.
6.
The lid is used to maintain the heat and prevents dirt
from getting inside. Before placing the lid make sure
there is no water on it.
7.
Always make sure that the thermostat is set to
„0" after frying is finished. RCBG-30STHB only:
in addition, set the On/Off button to „Off" and
disconnect the appliance from the power supply.
8.
RCBG-30STHB only:
After you finish frying, move the heating elements
near the control panel toward the outside of the
appliance, so that the control panel is turned back by
90° and the heating elements are in a vertical position
over the container. In this way, the remaining oil will
drip into the container.
9.
IMPORTANT! The appliance has an overheat
protection device. If the appliance overheats during
operation, it will immediately turn off. It is then
necessary to wait until the appliance cools down and
reset the overheat protection. To do this, remove
the button guard (unscrew and remove) and press
the "RESET" button. Re-install the button guard. The
appliance can be used again.
10.
RCBG-30STHB is equipped with a safety switch.
When the electrical panel and heating rods are lifted,
power supply is cut off.
11.
Used oil must be cooled down to room temperature
and then it can be drained using the drain tap.
IMPORTANT: When the appliance is filled with oil to
the maximum level, the maximum allowed side shelf
load is 10 kg.
3.4. CLEANING AND MAINTENANCE
a)
Before each cleaning, adjustment, replacement
of accessories and if the device is not used, it is
necessary to disconnect the power plug and cool the
device completely.
b)
Use only mild detergents suitable for washing
and
surfaces which come into contact with food to wash
the device.
Rev. 03.10.2018
c)
Do not use water to wash the electric control panel as
this may cause damage and invalidate the warranty.
d)
After cleaning the device, all parts should be dried
before using it again.
e)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
f)
Never spray the device with water jets.
g)
Regular inspections of the device must be carried out
in terms of its technical efficiency and any damages
h)
Use a soft cloth for cleaning.
9