How To Use - Xiaomi Mi 1C Manual De Usuario

Installation Instructions
Step 5: Install the front grille
1. Align 11 Front Grille Alignment Mark with
Mark, and make sure the front grille is properly embedded into the rear
grille.
2. Turn the front grille clockwise until the Front Grille Alignment Mark aligns
the Rear Grille Right Alignment Mark. Make sure the grilles are securely
fastened.
Rear Grille Le
Alignment Mark
Front Grille
Alignment Mark
Top View before
Fastening
the Front & Rear Grille
11 13
Step 6: Fasten the front grille
9
Insert fan grille screw into the hole at the bo om of the
fan grille. Turn the screw clockwise by using the included
Allen key to tighten it.
7
13 Rear Grille Le Alignment
Rear Grille Right
Alignment Mark
Front Grille
Alignment Mark
Top View a er Fastening
the Front & Rear Grille
9
7

How to Use

Connect to a power outlet
Plug the power cord into a power outlet. Once you hear a beep, the fan is
connected successfully.
Turn on/off
Turn on
Press the bu on to start the fan. When turned on for the
first time, the default speed is slow (1).
Turn off
When the fan is working, press and hold the bu on
Switching Speed/Mode
Switching speed
Press the bu on to adjust the speed. With each press, the corresponding
status indicator will be on (see the table below). The fan will remember and
apply the last used speed mode when turned on again.
6
to stop it.