Getting Started - INTERTECHNO ITM-200 Manual De Instrucciones

GB
The wireless magnet transmitter has 67 million possible fixed codes and
can therefore activate all self-learning intertechno wireless receivers,
including the wireless GONG ITR - 7000 and battery gong IT-9000
(MLR-1105).
Optionally ON/OFF - OFF/ON Activates when opened or closed.
An automatic switch-off time can be selected 0/1 min/5 mins/10 mins.
Screws and double adhesive tape included for easy installation on win-
dows, doors, sliding doors, drawers, display cabinets etc. with countless
possible uses.
Example uses:
Switching a light on or off when opening a door of any kind Activating
the gong when a door is opened.
Turning off the heating when a window is opened.
Safety measure e.g. exhaust control
(the exhaust hood of an open fire can only be switched on if the window
is open to avoid CO poisoning), etc.
With the intertechno IT-MG MASTERGATE, you also receive a push
notification on your smartphone as soon as a window
or door is opened.
At the same time, a siren with a wireless receiver can also be activated as
an alarm system.

GETTING STARTED

Before mounting:
Open the receiver by sliding the mounting plate to the side (Fig. 1)
Remove the battery fuse.
Coding: Adjusting to a wireless receiver (Fig. 2)
Please refer to the wireless receiver's operating manual.
The automatic switch-off feature must be set to 0.
As soon as the receiver is ready to learn, the wireless magnet transmit-
ter's ON signal must be sent.
Either by:
1.) Moving the slider from OFF to ON
The red LED will flash 1x and the encoding will be taught in.
or
2.) sliding the transmitter's magnet when set to ON.
Operating instructions
ITM-200
›