Sears Kenmore 11041952710 Instrucciones De Instalación página 12

CODE
b. 05 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number
of nickels: b.05 = $0.25.
By pressing the
of 1–199 nickels.
With coin slide activation, this represents the total
vend price in nickels. Example: b.40 is equal to $2.00.
g
Press the
WARM
C. 20 VALUE OF COIN 2
C. 20 This represents the value of coin 2 in number
of nickels: C.20 = $1.00.
By pressing the
of 1–199 nickels.
g
Press the
WARM
d. 00 COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
d. 00 Not Selected 'OFF'.
d. CS Selected 'ON'. Press the COLD button
three consecutive times for this selection.
When coin slide mode is selected, set 'b'. equal to
value of slide in 5% increments. Set step 6 (regular
cycle price) and step 3 (special cycle price) to
number of slide operations. If the installer sets up
'CS' on a coin drop model, it will not register coins.
g
Press the WARM button once to advance to next code.
E. 00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the customer
display to show the number of coins (coin 1) to enter,
rather than the monetary amount.
E. 00 Not Selected 'OFF'.
AC
E. Selected 'ON'. Press the COLD button
three consecutive times for this selection.
g
Press the
WARM
F. 00 ENHANCED PRICING OPTION
F. 00 Not Selected 'OFF'.
SU
F. Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing extra
money. Set-up codes 'H.' and 'h.' will be displayed
only when this option is enabled. Press the COLD
button for this selection.
g
Press the WARM button once to advance to next code.
H. 01 SUPER CYCLE UPGRADE PRICE
(Skipped unless Super Cycle pricing is enabled.)
H. 01 This represents the number of coin 1 required to
upgrade a base cycle to a super cycle. Advance
from 0–33 by pressing the HOT button.
g
Press the
WARM
12
EXPLANATION
button, there is the option
HOT
button once to advance to next code.
button, there is the option
HOT
button once to advance to next code.
button once to advance to next code.
button once to advance to next code.
CODE
h. 01 SUPER CYCLE TYPE
(Skipped unless Super Cycle pricing is enabled.)
h. 01 This represents the Super Cycle upgrade option. Press
the HOT button to step through upgrade options 1
through 3 as follows:
01 – enhanced wash, extra 3 minutes of wash tumble
in addition to the programmed wash time.
02 – extra rinse for all cycles.
03 – both 01 and 02.
g
Press the
WARM
J. Cd COIN/DEBIT OPTION
J. Cd Both coin & debit selected. Press the COLD button
three consecutive times to change this selection.
J. C_ Coins selected, debit disabled. Press the COLD button
three consecutive times to change this selection.
J. _d Debit card selected, coins disabled. Press the COLD
button three consecutive times to change this selection.
J. Ed Enhanced Debit is self-selected when a Generation 2
card reader is installed in the washer. The Ed option
cannot be manually selected or deselected.
g
Press the WARM button once to advance to next code.
L. 00 PRICE SUPPRESSION OPTION
This option causes the customer display to show
'ADD' or 'AVAILABLE' rather than the amount of
money to add. (Used mainly in debit installations.)
L. 00 Not Selected 'OFF'.
L. PS Selected 'ON'. Press the COLD button once
for this selection.
g
Press the WARM button once to advance to next code.
n. CE CLEAR ESCROW OPTION
When selected, money held in escrow for
30 minutes without further escrow or cycle activity
will be cleared.
n. 00 Not Selected 'OFF'.
CE
n. Selected 'ON'. Press the COLD button once
for this selection.
g
Press the WARM button once to advance to next code.
U. 00 COIN (HUNDREDTH) INCREMENT OFFSET
U. 00 This represents the penny increment price offset used
with Gen. 2 card readers. Choose from 0–4 pennies
by pressing the HOT button.
g
Press the WARM button once to advance to next code.
A1. 00 PREWASH LENGTH
A1. 00 This is the number of minutes of PREWASH. Choose
00 to disable the prewash or select between 02 and
07 minutes by pressing the HOT button.
g
Press the WARM button once to advance to next code.
EXPLANATION
button once to advance to next code.