Ortovox S1+ Instrucciones De Uso página 62

INSTRUCTIONS
4 DISPLAY CONTRAST SETTING
The desired contrast is adjusted using the MENU
button (3) and confirmed with the OK button (2).
5 UPDATE
An infrared reader (accessories) can be used
to connect the S1+
printouts.
6 INCLINOMETER
The slope angle can be determined using
the "SLOPE MEASUREMENT" function.
If this function is selected, then the
while the slope angle is being measured.
During the measurement, place the top side of
the S1+ exactly flush with the snow surface.
Tolerance of accuracy of the slope sensor: +- 1°
The determined measurement can be retained
by pressing the OK button (2).
A new measurement can be taken by pressing
the OK button (2) again.
to a PC for updates and log
S1+ transmits
S1+
EN 61