Instructions For Use (User / Technician) - Ottobock 736Y6 Instrucciones De Uso

5 Use
CAUTION
Carelessness when working with the product
Injuries (for instance to the hands) due to pinching or cutting
► Use caution and maintain awareness of safety when working
with the product.
NOTICE
Failure to follow the instructions for use
Damage to components and inadequate strength of the crimped
connection
► Observe all instructions for use.
3 4
+ (Pages 3 + 4):
► Only use the product in clean condition (section "Cleaning" -
see Page 11).
► Insert the component for crimping as shown in the figures.
5
(Page 5):
► NOTICE! Never load multiple components and crimp them
simultaneously.
Steps for crimping (example with 10Y31=2):
Insert component;
strip steel cable (e.g. with a knife);
ponent; with the clamping jaws of the vice, compress the tool
fully to crimp the component with the steel cable
► Follow the crimping procedure.
As an exception for components 10Y23 and 10Y28=1, the
steps and
► In step , only clamp the complete crimping tool with compon­
ents 1, 2 and 3 in the vice.
► In step , strip the steel cable far enough so it is fully crimped
with the component.
10
Inserting the component
Crimping (10Y31=2)
slide tool together;
are carried out before step .
insert tool into vice;
insert steel cable into com­