Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Timer
Timer function can be used in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
1.
At least one cooking zone must be on (although it must not be selected).
2.
Touch the Timer (5). The minder indicator will start flashing and "10" will
show in the timer display.
3.
Set the time by touching the "-" or "+" of the power level slider (3).
Hint: Touch the "-" or "+" of the slider (3) once to decrease or increase by 1
minute. Touch and hold the "-" or "+" of the slider (3) to decrease or
increase by 10 minutes.
4.
When the time is set, it will begin to count down immediately. The display
will show the remaining time.
5.
When the set time is finished, the buzzer will beep for 30 seconds and the timer
indicator shows "00".
Setting the timer to turn one cooking zone off
1.
Select the relevant cooking zone which is working by touching the zone
selector (6).
2.
Press the Timer (5). The minder indicator will start flashing and "10" will be
shown on the Timer display.
3.
Using the "+" and "-" buttons (3), you can realize the setting of timing from
1 to 99 minutes.
4.
When the time is set, the timer indicator will flash for 5 seconds and the
countdown will begin immediately. The display will show the remaining time.
5.
When cooking timer expires, the corresponding cooking zone will be
automatically switched off and the display will show "H". Other cooking zone
will keep operating if they were turned on previously.
- To cancel the timer, touch the "-" and "+" together, the timer is cancelled, and
the "00" will be shown in the minute display.
Setting the timer to turn more than one cooking zone off
1.
When using the timer function in more than one cooking zone, then the timer
display will show the shortest time (e.g. zone 3# setting time of 3 minutes,
zone 2# setting time of 6 minutes, the timer indicator shows "3"). The flashing
red dot next to power level indicates of which cooking zone is the time shown
on the timer display.
2.
When
will be automatically switched off and the display will show "H".
cooking
timer
expires,
the
corresponding
EN
cooking
zone
Publicidad
