Audio Streaming; Pairing The Audio Device With The; Universal Media Interface - Mercedes-Benz Universal Media Interface Instrucciones De Servicio

MBA_BA_book.book Seite 48 Montag, 19. Mai 2008 12:41 12

Audio streaming

Pairing the audio device with the

Universal Media Interface

G
Risk of accident
Only pair the Universal Media Interface with
the audio device with the vehicle at a stand-
still. Otherwise, there is a risk that you could
be distracted from traffic conditions and
cause an accident.
The Universal Media Interface and audio
device must be paired before they can be
used together. This can be done on either
the audio device or the Universal Media In-
terface.
After they have been paired, the two devic-
es are automatically connected within the
vehicle whenever they are switched on.
Notes
Corresponding settings may need to be
configured on the audio device being
used for the pairing process and for au-
tomatic connection to the Universal Me-
dia Interface. (Please refer to the audio
device operating instructions.)
48
For successful pairing, the audio device
and Universal Media Interface must be
®
switched on and Bluetooth must be en-
abled. The audio device to be paired
must be in the vehicle.
Pairing on the Universal Media
Interface
1. Switch on the audio system and call up
the base menu "Disc". (Please refer to
the audio system operating instruc-
tions.)
2. With the CD menu active, switch first
of all into the AUX menu.
The last selected audio source is acti-
vated.
3. If necessary, change the audio source:
select Audio Streaming.
®
4. Enable the Bluetooth function of the
audio device and make it visible to oth-
er devices. (Please refer to the operat-
ing instructions for the audio device.)
5. Select Search for BT devices.
®
All Bluetooth audio streaming-com-
patible devices are shown.
6. Select the desired audio device for
connection setup.
7. Enter the PIN of the audio device on
the Universal Media Interface and con-
firm with OK. (Please refer to the oper-
ating instructions for the audio
device.)
Note
If no PIN is specified for the audio device,
a combination of numbers of your choice
can be entered on the Universal Media
Interface. This must then be entered on
the audio device.
®
The paired Bluetooth device that is
compatible with audio streaming is ac-
tivated by the operating system and
playback of the existing audio files is
started.
Pairing on the audio device
1. Switch on the audio system and call up
the base menu "Disc". (Please refer to
the audio system operating instruc-
tions.)
2. With the CD menu active, switch first
of all into the AUX menu.
The last selected audio source is acti-
vated.
3. If necessary, change the audio source:
select Audio Streaming.