Safety Instructions - Festool SYSLITE STL 450 Manual De Instrucciones Original

GB
STL 450
Original operating manual
The specified illustrations appear at the
beginning of the Operating Instructions.
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions
and safety notices!
CAUTION! Do not look directly
into the light beam!
The surface temperature
D
should not exceed 90 °C on
horizontal and 150 °C on ver-
tical outer surfaces.
Device qualifies for "rough
use" according DIN EN 60598.
Do not dispose of as domestic
waste.
12
2

Safety instructions

WARNING!
warnings, instructions, illustrations
and specifications provided with this
tool. Failure to follow all instructions
listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
– Handle the device with care. The de-
vice may generate heat that increas-
es the risk of fire and explosions.
– Never use the device in potentially
explosive environments.
– Do not cover the device when
switched on. The device heats up
during operation and can burn the
surface of the skin.
–Warning of harmful light
radiation. Do not look into
the light beam for long pe-
riods. Do not direct the
light beam towards other people or
animals. Optical radiation can dam-
age the eyes.
– Do not use the device for illuminat-
ing the road. The device is not ap-
proved for illuminating the road.
– Do not connect the device to a power
supply when it is wet. If the device
falls into water, it must be dried be-
fore being connected to a power sup-
ply.
– Have your device repaired by quali-
fied specialist staff and always use
original spare partsThe light source
fitted in this device must only be re-
Read all safety