Machine Features; Temperature Monitoring - Festool SYSLITE STL 450 Manual De Instrucciones Original

GB
STL 450
Grazing light
Max. reach
Weight
Protection class
5

Machine features

[1-1] On/Off switch
[1-2] Luminous area
[1-3] Power cable
[1-4] Cable holder
6 Commissioning
Unauthorised voltage or frequency!
Risk of accidents

Observe the specifications on the rat-
ing plate.

Observe country-specific regulations.
Electric shock caused by penetrating
moisture.
Physical injury and damage to the
mains plug.

Do not insert the mains plug in the
socket if the surroundings are damp.
14
WARNING
WARNING
6.1 On/Off switch [1-1]
Switching on

Unwind the power cable from the cable
holder [1-4].

Insert mains plug into socket.

Press the ON/OFF switch [1-1].
Switching off

Press the ON/OFF switch [1-1] again.

Unplug the mains plug.

Wind the power cable onto the cable
holder [1-4].
6.2

Temperature monitoring

When the permissible operating tem-
perature range is not reached/is exceed-
ed, the grazing light switches itself off.
7 Setup
The grazing has a range of 2.50 m. When
this range is exceeded, uneven surfaces
may not be detected.
To ensure the surface is perfectly illumi-
nated, position the grazing light at a 90°
angle to the surface [2].
The grazing light can illuminate various
target surfaces:
[3 A] Floor -> 7.1 section.
[3 B]+[3 C] Wall -> 7.1 and 7.2 sections.
[3 D] Ceiling -> 7.2 section.
STL 450
2.50 m
1,5 kg
IP 55