Direct Wire Routing; Prepare Dishwasher - Whirlpool WDF518SAHW0 Instrucciones De Instalación

DIRECT WIRE ROUTING

6.
Direct Wire—route cable
If direct wire, route the cable 4" (10.2 cm) from the right side of
the cabinet to align with channel in the bottom of the dishwasher.
Tape cable to the floor in the area shown. This will help secure
the cable in place when the dishwasher is moved into the cabinet
opening during direct wire connection.
10
Direct wire
location
4"

PREPARE DISHWASHER

WARNING
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
7.
Put the dishwasher on its back
Dishwasher bottom
Helpful Tip: Place cardboard under dishwasher until installed
in cabinet opening to avoid damaging floor covering.
Using two or more people, grasp sides of dishwasher door frame,
and place the dishwasher on its back.
Do not use the door panel as a worktable without first covering
it with a towel to avoid scratching the door panel.