Suspended Installation - S&P TERMOTECH - 1250 Manual De Instalación. Instrucciones De Uso

- Leave a distance of at least 100 cm between the surface of the
panel and the objects that are below it.
- Place the panel at a distance of at least 30 cm from the side
walls and at least 50 cm if these will are covered with synthetic or
inflammable materials.
- Place the panels at least 30 cm from windows.
- Always place the panel at a minimum height of 1.80 m.
The Termotech model should be installed using the support hooks
provided with the packaging. The installation method can be found in the
following section.

SUSPENDED INSTALLATION

The TERMOTECH model should be installed using the support hooks provided
with the packaging.
The following drawings show how to insert the support hooks.
Firstly, place the four support hooks provided in the packaging, at the back of the
panel (1), then push them in the direction indicated (2), until they are inserted
inside.
Afterwards, fix the support hooks to the aluminium profile of the panel using the 4
screws supplied with the hooks.
12