General Regulations - S&P TERMOTECH - 1250 Manual De Instalación. Instrucciones De Uso

ENGLISH
1 -GENERAL
We thank you for choosing to purchase this radiant panel. You have just acquired
a quality product which has been entirely manufactured under the recognised
technical safety regulations and in accordance with the
Read the contents of this instructions book carefully, as it contains important
information relative to your safety during the installation, use and the
maintenance of this product.
Keep it in a safe place and consult when needed.
We ask you to check that this product is in a perfect state when unpacking it,
since any visible manufacturer defect is covered by the
2 - SAFETY REGULATIONS AND EC MARKING
The technicians at
increasingly efficient products which comply with the safety standards in force
The following regulations and recommendations, reflect entirely the standards in
force on safety issues and are thus based mainly on the compliance of the
general standards. Therefore, we recommend all those exposed to any risk to
pay strict attention to the accident prevention regulations in force their country.
S&P
will be exempt from any liability for eventual damages caused to persons or
property derived from a lack of compliance of the safety regulations, as well as
possible modifications to the product.
EC
The marking and the corresponding declaration of conformity certify the
compliance with the applicable EU regulations.
3 -

GENERAL REGULATIONS

The information contained in this manual is directed at all personnel in order to
prevent possible dangers to people and/or property, caused by faulty
manipulation or maintenance.
All maintenance interventions (ordinary and extraordinary) must be carried out
with the electrical supply to the appliance disconnected.
S&P
are firmly committed to the research and development of
EC
S&P
9
standards.
guarantee.