Technical Specifications - König Electronic SAT-IRCABLE10 Manual De Uso

Remote Control Extension System
Connections
With the König Remote Control Extension System, you will be able to transmit infrared signals from
any room to a Satellite receiver of VCR and other devices.
• Step 1: Install the transmitter near the equipment you want to control. Optimize the position of the
remote transmitter for the best result. Connect the transmitter to the receiver using your existing (or
• Step 2: Install the receiver in the room where you want to use it. Optimize the position of the remote
eye for best result.
• Begin using the system with the receiver level set to maximum. When interference or saturation
occurs, decrease the level.

Technical Specifications

IR Remote Control Receiver
IR Section:
- Carrier frequency: 37~45kHz
- Half angle: +/- 45°
- Receiver distance: 7 meters (typical)
- RF Section:
- Transmitter frequency: 10.52MHz +/-250kHz (ASK)
- Transmitter level: 110dB
- Injection loss: 0~15dB
VHF Insertion loss: 2dB (Max.)
UHF Insertion loss: 4dB (Max.)
Power Supply: 12VDC, 100mA adapter
ENGLISH
newly installed) coax cable.
2