Control Leds - HQ-Power AERON 250 I Manual Del Usuario

Scanner de 6 canales
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• Control LEDs

Red
Power ON
Yellow
DMX out (sound/auto mode)
Green
DMX in
e. Stand-Alone Mode
In stand-alone mode, your VDP250SC6M2 can be used without controller. The scanner is equipped with a built-in
microphone which allows a sound-controlled operation. Select the "Master mode" to use this function.
f. Master/Slave Mode
This operation mode allows all slave devices to operate synchronously with the master device. Connect the DMX out
of one device to the DMX in of the next using a cable with XLR jacks. Set the master device to "No DMX sound" or
"No DMX auto". Set the address of all slave devices to 1.
g. DMX Mode
All DMX-controlled devices need a digital start address so that the correct device responds to the signals. This start
address is the channel number from which the device starts to "listen" to the DMX controller. Enter the correct
number and read it from the display located on the base of the VDP250SC6M2.
You can use the same starting address for a whole group of devices or enter an individual one for every device.
When all devices have the same address, all the VDP250SC6M2s will "listen" to the control signal on one particular
channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you set
different addresses, each device will "listen" to a separate channel number. Changing the settings of one channel will
only affect the device in question.
In the case of the 6-channel VDP250SC6M2, you will have to set the start address of the first VDP250SC6M2 to 1,
the second VDP250SC6M2 to 7 (1 + 6), the third to 13 (7 + 6) and so on.
h. Detailed DMX Values per Channel
Channel
Function
1
Shutter, strobe
2
Colour wheel
3
Rotating gobo wheel
VDP250SC6M2_v4
From
To
Description
0
15
No function (shutter closed)
16
128
Gradual adjustment of dimmer intensity from 0 ~ 100%
129
131
Reset
132
139
No function (shutter open)
140
199
Strobe from slow to fast
200
249
Random strobe
250
255
Shutter open
White + 7-colour change (magenta + yellow + orange +
0
128
green + red + blue + purple)
Forwards and backwards rainbow effect with increasing
129
255
speed
0
15
Open
16
31
Gobo 1
32
47
Gobo 2
48
63
Gobo 3
64
79
Gobo 4
80
95
Gobo 5
96
111
Gobo 6
112
127
Gobo 7
128
134
No function
Forwards and backwards gobo change with increasing
135
255
speed
6
HQPOWER

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vdp250sc6m2

Tabla de contenido