Cleaning And Maintenance; Technical Specifications - HQ-Power AERON 250 I Manual Del Usuario

4 Gobo rotation
5
6

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. Clean the mirror on a weekly basis; the interior, the cooling fans, the filters and the gobos should be cleaned
monthly. Lubricate the gobo wheel twice a year.
8. There are no user-serviceable parts apart from the lamp and the fuse.
9. Contact your dealer for spare parts if necessary.
WARNING
THIS FIXTURE NEEDS PERIODICAL MAINTENANCE. DUST INSIDE THE UNIT MUST BE REMOVED.
VENTILATION HOLES MUST BE KEPT CLEAN. REPLACE THE LAMP BEFORE ITS END OF LIFE. CONSULT
LAMP MANUFACTURER. INSPECT ABOVE POINTS BEFORE EACH OPERATION. NOT RESPECTING THESE
WARNINGS MAY RESULT IN OVERHEAT OR FIRE AND WARRANTY WILL VOID. READ THE MANUAL FOR
ADDITIONAL SAFETY INFORMATION BEFORE USE.

8. Technical Specifications

Power Supply
Power Consumption
Lamp
Fuse
Dimensions
Total Weight
Max. Humidity
Operation Temperature
Max. Ambient Temperature
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
VDP250SC6M2_v4
0
16
136
Pan -
Tilt -
max. 230VAC / 50Hz
max. 350W
1 x Philips MSD 250W, 6700K (order code LAMP250MSD), 1 x Philips
MSD 250, 8500K (order code LAMP250MSD/2PH), 1 x Xenpow MSD
250, 8000K (order code LAMP250MSD/2) or 1 x Sylvania MSD 250,
8500K (order code LAMP250MSD/2SYL) – lamp not incl.
5A, 250VAC (5 x 20mm) (order code FF5N)
535 x 295 x 180mm
14kg
50% RH
-5°C ~ +45°C
45°C
15 No rotation
135 Forwards gobo rotation with increasing speed
255 Backwards gobo rotation with increasing speed
Push slider in order to move the mirror horizontally. Gradual
- mirror adjustment from one of slider to the other (0-255,
128-center). Mirror can be stopped at any position.
Push slider in order to move the mirror vertically. Gradual
- mirror adjustment from one of slider to the other (0-255,
128-center). Mirror can be stopped at any position.
7 HQPOWER