Grunkel PLV-900 Manual De Instrucciones página 15

We recommend using decalcified water to prevent the build-up of lime deposits.
Press the handle release and lock the handle in the operating position.
Turn the steam selector to the position.
Open the rubber lid on the water reservoir by lifting up the side with the symbol ; do
not lift up the opposite side.
Fill the empty water reservoir using the measuring cup provided. Fill to the indicated
"Max" level only.
Close the water fill hole.
Ironing
Steam ironing requires high temperatures. The temperature level for steam ironing is
indicated in the temperature control knob.
After filling the reservoir with water, place the steam iron upright on its base stand and
insert the plug into the wall socket.
Set the temperature control knob to the required ironing temperature as indicated by the
ironing symbols.
During the heating-up proceed the indicator lamp will be on, the lamp will go out once
the required ironing temperature is reached.
Before ironing any fabrics, the soleplate should be cleaned by passing it over an old,
clean cotton cloth, while using the steam jet function; this helps to flush out any dirt
residues or lint particles trapped inside the openings in the soleplate.
The steam function can now be switched on and off using the steam selector.
For dry ironing, the water reservoir may be empty. Should there be water left in the re-
servoir, the steam jet function may also be used when dry-ironing at higher temperature
settings.
Place the steam iron upright on its base stand after use and remove the plug from the
wall socket.
CAUTION: the appliance will remain hot for several minutes after use. Wai until the
appliance has cooled down entirely before handling it.
15