Steam jet function
When the steam jet button
soleplate, this function can be very useful when removing stubborn creases. The steam
jet function may also be used with iron held vertically, to restore the surface of fabrics.
For a sufficiently strong steam jet, the reservoir must be at least a quarter full.
CAUTION: do not aim the iron towards other people when the soleplate is emitting the
steam jet in vertical position.
For a sufficiently strong steam jet, the reservoir must be at least a quarter full.
General ironing information
Always check first the ironing instructions attached to the article to be ironed.
The meaning of the ironing symbols is as follows:
Symbol
These markings can also be found on the temperature control knob of the steam iron in
form of dot symbols.
Laundry to be ironed should be sorted according to the fabric ironing temperature. Fo-
llowing the ironing symbols and start with the lowest temperature.
When ironing highly sensitive fabrics, you may carefully test-iron at a non-visible point,
e.g. Inside of seam, start with the lowest temperature.
If the laundry is being dried in a dryer before ironing, the temperature should be adjusted
to "iron dry". Very dry fabrics are difficult to iron.
Cleaning and maintenance
The appliance still remains hot after use. Allow it to cool down completely before hand-
ling it for cleaning or storage.
The appliance must be unplugged from the electrical outlet before cleaning.
Never immerse the appliance into water or any other liquid. Do not put it under a water
stream. Do not put the appliance into the dishwasher.
is pressed, an additional hot steam jet is emitted from the
Type of fabric
Synthetics
Silk and wool
Cotton and linen
16
Temperature
Low
Medium
High