Setting The Alarms; Snooze Function - 1 BY ONE OUK00-0860 Manual De Instrucciones

4. Press "<" or ">" button to select "Sleep" option in the
system library submenu.
5. Press /OK button to enter into sleep timer
settings. "Set sleep time" will be shown on the
display along with a flashing " " icon.
6. Press "<" or ">" button to adjust the sleep delay time using the following
options (in minutes): Sleep off/15/30/45/60/90.
7. The chosen setting will confirm automatically after 10 seconds and the sleep
icon " " will stop flashing.
Note: To cancel sleep mode, select "Sleep off". The sleep icon
" " will disappear once sleep mode is disabled.

Setting the alarms

There are two wake-up alarms with snooze function. Each alarm can use a
buzzer, DAB or FM for the alarm sound. An active alarm is indicated by bell
icons " " and " " in the left of the LCD display.
1 2
Note: the alarm parameters can only be set after the clock time on the unit
has been set.
1. During any operating mode, press and hold the
"ALARM/SNOOZE/DIM" button and "Alarm 1 Setup"
will be shown on the display.
2. Short press "<" or ">" button to select between
"Alarm1" and "Alarm2".
3. Short press /OK button to confirm the Alarm you
selected. The hour digits will flash on the display.
4. Short press "<" or ">" button to adjust the hour, then press OK button to
confirm the hour. The hour digit will stop flashing and the minute digit will
start flashing.
5. Short press "<" or ">" button to adjust the minutes, then press OK button to
confirm.
9
6. Short press "<" or ">" button to select the alarm duration of
"15/30/45/60/90" mins, then press OK button to confirm the duration.
7. Short press "<" or ">" button to select the Alarm Source "Buzzer/DAB/FM",
then press OK button to confirm. If DAB or FM is chosen as the audio source,
you will then be prompted to select either the last listened station or one of
the preset stations (if set).
8. Short press "<" or ">" button to select the Alarm Period "Daily/Once/Week-
ends/Weekdays", then press OK button to confirm.
9. Short press "<" or ">" button to select the Alarm "On/Off", then press OK
button to confirm.
10. "Alarm Saved" will be shown once the setting is finished.
Notes:
1. To ensure the alarm function works properly, make sure the volume is set to
a proper level.
2. Please do not switch off the unit's power by the ON/OFF selector after
setting an alarm, or else the alarm will not sound.
3. At the set time, the alarm will sound, quietly at first, then gradually building
up to the set volume. When an alarm sounds, the bell icon in the display will
flash.
4. Press and hold ALARM/SNOOZE button for 3 seconds to cancel the Alarm
when it is going off.

Snooze function

1. When the alarm is going off (sounding), short pressing
the ALARM/SNOOZE button will stop the alarm one time.
The Snooze icon " " will then show on the display.
2. The alarm will sound again after 10 minutes (the default
snooze time).
3. To turn off the alarm completely, press and hold
ALARM/SNOOZE button for 3 seconds
10