MAX TOOLS TR100 Manual Del Usuario página 15

instructions provided in the next paragraph.
If, instead, the pressure has dropped below
20 PSI (about 1.4 bar), DO NOT DRIVE ON and
contact the roadside assistance service.
Use the compressor to keep the correct
pressure of the tires.
Proper tire pressure is key for your vehicle's
performance. It can significantly influence
fuel consumption (even by 30%) as well as tire
life (even by 50%). Besides, it can modify the
overall behavior of a vehicle, especially when
driving on bends.
Your should check your tires on a regular basis,
at least every couple of weeks.
NOTE
Every tire and every vehicle has its recommended
pressure range You can generally find it in the
User Manual of your vehicle. NEVER EXCEED
the maximum pressure value recommended by
the Manufacturer.
WARNING
Tire pressure reading must always be taken
when the tire is cold.
Hot tires or tires that have just been driven on
will provide wrong readings.
Try to read the pressure before driving for a
long time or after letting the tire rest for about
an hour.
The compressor can be used also for all those
inflating applications that require limited air
volumes with fairly high pressures, such as
sports balls or bike tires.
Inside the container provided with the kit
there are some accessories to be used in
the above cases, always remembering to
check the inflation pressures required by the
manufacturers.
WARRANTY
Max Tools warrants that the TR100 product
is free from any defects in both material and
workmanship for a period of two years from
purchase date. This Limited Warranty does
not cover the usual damage deriving from
wear and improper use of the product itself.
Max Tools reserves the right to substitute
the product for equal or greater value in
the event the product cannot be repaired
or replaced with an identical product
In accordance with applicable legislation,
electrical devices no longer in use need to be
collected separately and deposited at an eco-
friendly recycling centre.
English
15