Maintenance (To Be Carried Out By Qualified Service Personnel Only) - Ugolini MT mini Serie Manual De Instrucciones

4 It needs to fix everything back in the initial position after any
repairmen, like screws and covers.
6. 1 MAINTENANCE (TO BE CARRIED OUT BY
QUALIFIED SERVICE PERSONNEL ONLY)
1 Monthly on MT 1 MINI model: remove the dust from the
condenser. To do this unplug the unit.
2 Monthly on MT 2 MINI and MT 3 MINI models: remove
the dust from the condenser filter.
3 Annually: remove the panels and clean the inside of the
machine including the base, side panels, condenser, etc.
4 Annually: Check if the auger bushings are worn out or
ovalized. If they are, replace them with new ones.
5 Never remove the insulating jacket from around the suction
tubing of the evaporator (the copper tubing located on the right
side of gear motor). In case the insulating jacket is missing
replace the entire parts with original spare parts from the
supplier.
6 In order to prevent any damages to the dispenser, all
plastics parts must be lubricated only with grease supplied by
the manufacturer or with another lubricating product suitable for
polycarbonate.
IMPORTANT
The electric diagram of the dispenser is located in the
inner part of the dispensing side panel.
17