Installing The Batteries; First Time Installation - Valueline VLS-DVBS2-FTA1 Manual De Usuario

Use

Installing the batteries

1. Remove the cover from the battery compartment.
2. Insert the batteries into the battery compartment.
Make sure that the battery polarity (+/-) matches the
polarity markings inside the battery compartment.
3. Place the cover onto the battery compartment.
First-time installation
1. Make sure that all connections are correct. Refer to
the section "Connection scheme".
2. Switch on the TV.
3. Switch on the device.
4. If you use the device for the first time or if you have
restored the factory settings, the main menu will
appear on the TV screen:
5. "OSD Language": Press the right/left buttons to
select a language.
"Dish Setup": Press the right/left buttons or the OK
button to access the menu.
6. Press the OK button to confirm.
7. When the automatic channel search is completed,
you are ready to watch TV or listen to the radio.
Menu
"Program"
"Program Edit"
You cannot access the menu without entering the correct password.
1. Enter the password: "000000".
2. Press the OK button.
5 5
English
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit the
menu.
To move a programme:
1. Select the programme.
2. Press the red button.
3. Move the programme.
4. Press the OK button.
To skip a programme:
1. Select the programme.
2. Press the green button.
3. To cancel, press the green button
again.
4. Press the exit button to confirm
and exit the menu.
To lock a programme:
1. Select the programme.
2. Press the yellow button.
3. To cancel, press the yellow
button again.
4. Press the exit button to confirm
and exit the menu.
5. To view the programme, enter
the password and press the OK
button.
To delete a programme:
1. Select the programme.
2. Press the blue button.
A message will appear.
3. Press the OK button.
To create a shortlist of favourite
programme:
1. Select the programme.
2. Press the favourite button.
3. To cancel, press the favourite
button again.
4. Press the exit button to confirm
and exit the menu.
To view the programme:
1. Press the favourite button.
2. Select the programme.
3. Press the OK button.
To rename a programme:
1. Select the programme.
2. Press the recall button.
3. Enter the name.
4. Press the OK button.
5. To cancel, press the exit button.