Amica 10143.4TdDpHaQaXSp Manual De Instrucciones página 48

OPERATION
1.Switch on the oven.
Important! Electronic programmer is
ready for operation after correct time has
been set.
When the appliance is switched on for the
first time or when there has been a power cut,
12:00 is shown on the display and
symbol is flashing. Set the correct time using
the control knob
Time will be set if setting is not changed
within 5 seconds and the menu button is not
pressed. .
MENU
Operation of the oven is not possible if
current time is not set.
.
2.Setting kitchen timer
Press the
MENU
symbol (kitchen timer) flashes. "00:00" will
be displayed instead of current time. Set the
timer using the control knob
minute resolution). Time will be set if setting is
not changed within 5 seconds and the menu
button is not pressed.
MENU
Current time is shown and
displayed.
An acoustic signal is sounded after the set
time has elapsed (two beeps - a pause - two
beeps). The sequence of acoustic signals
is repeated for approximately one minute
in three second intervals. The
flashing. To deactivate the alarm press any
button or turn oven function selector knob to
"0" or operate the control knob. Once alarm
is deactivated, the
goes out.
48
button repeatedly until
(with one
symbol is
symbol is
symbol (kitchen timer)