bora UUE3 Manual De Instrucciones Y Montaje página 16

Installation / mounting of the air recirculation unit
1. The knurled screws included in delivery must be attached to
the side of the air recirculation unit according to the installation
situation so that a later exchange of the finefilter is possible.
2. Now attach the activated carbon cartridges: stick one cartridge on the air
recirculation unit and lock it into place by turning it one revolution clock-
wise. This work step should now be performed for all cartridges.
3. As already described in the "Scope of supply" chapter, two different
mounting brackets and/or straps have been included in the delivery of
the air recirculation unit. These are attached to the air recirculation unit
using the included screws as required.
4. Now connect the air recirculation unit to the exhaust
ducts. The connection of the air recirculation unit is de-
signed for the Naber Compair Flow 150 system. To be
able to guarantee air-tightness, the connection must be
sealed with air-tight fabric tape.
5. Now fix the position of the air recirculation unit by screw-
ing the unit onto a suitable spot using the mounting
brackets and/or straps.
Fastening examples:
- Cabinet side
- Cabinet floors
- Construction strip
- Masonry
16
GB