Cleaning And Care; Overheating Protection Circuit - Unold 86535 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56
appliance switches off automatically. If you do not make a time setting, the
appliance will run continuously.
Switching off
12. To switch off the appliance, press the ON/OFF button, switch the main
switch on the rear of the appliance to "0" and unplug the plug from the
electrical outlet.
13. Important note: The appliance has an automatic switch-off with cooling mode.
If the appliance was running in heating mode, it takes about 30 seconds for the
appliance to turn off after pressing the ON / OFF button.
Be aware that the appliance can become very hot – danger of burns!
Particularly ensure that children are kept away from the appliance.

CLEANING AND CARE

1.
Never use any abrasive scouring agents, steel wool, metal objects, hot
cleaning agents or disinfectants.
2.
To clean the filter, open the filter cover. Remove the filter and clean it with
warm water that must not be hotter than 30°C.
3.
Allow the filter to dry completely, before you reinsert it. Then carefully close
the filter cover.
4.
You can remove dust in the appliance if you carefully hold a vacuum cleaner
against the air outlet grille or air inlet grille.
5.
Store the fan heater in a dry, safe place so that it is protected from dust,
shocks, heat and moisture.

OVERHEATING PROTECTION CIRCUIT

1.
The appliance is equipped with an overheating protection circuit that
switches the appliance off when it is heated over 70° C.
2.
If the overheating protection circuit has been tripped, switch the appliance
off, unplug the plug from the electrical outlet and let the appliance cool for
at least 30 minutes.
Stand 18.5.2020
Copyright UNOLD AG | www.unold.de
Switch off the appliance.
Unplug the plug from the electrical outlet.
Allow the appliance to cool completely.
27 von 76

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3d

Tabla de contenido