Cleaning And Care - Unold 86890 Instrucciones De Uso

Swing function/oscillation
5. Press the „Oscillation (Swing)" button to switch on the swing function.
Press the button again to stop the appliance in the current position, the fan
however continues to run.
Timer
6. Via the Timer button you can select the desired runtime of the appliance.
This is possible in the range 0.5 to 7.5 hours in increments of 30 minutes
(e.g. 0.5 hours, 1 hour, 1.5 hours, etc.). Press the „Timer" button until the
indicator light for the selected time is illuminated. After this time elapses
the appliance switches off automatically. If you do not make a time setting,
the appliance will run continuously.
Switching off
7. Press the „ON/OFF" button again or the „ON/OFF" button on the remote
control unit to switch off the appliance. When you are no longer using the
appliance, unplug the plug from the electrical outlet.

CLEANING AND CARE

Switch off the appliance, by pressing the "ON/OFF" button, and unplug it
from the electrical outlet.
Never immerse the appliance in water. The motor or electrical components
of the appliance must not get wet.
1. Never use any abrasive scouring agents, steel wool, metal objects, hot
cleaning agents or disinfectants.
2. Wipe off the housing and grille of the fan with a slightly damp cloth.
3. Store the fan in a dry, safe place so that it is protected from dust, impact,
heat and moisture.
20
Copyright UNOLD AG | www.unold.de