Hearth/Base; Center Front Panel; Left Side Panel; Right Side Panel - Twin-Star International 23DM088 Manual De Instrucciones

3. Insert one Wood Dowel (N) into each
of the pre-drilled holes.
4. Push the Right Front Panel (C) and Left
Front Panel (B) snug to the Center Front
Panel (D). Make sure the Wood Dowels
are seated in the pre-drilled holes. Insert
Bolts (L) and Washers (M) into the
holes in the mounting blocks.
HAND TIGHTEN ONLY.
5. Locate Hearth/Base (A) and set out
finished side up on the floor.
6. Insert one Wood Dowel (N) into each
of the pre-drilled holes.
7. Attach the Completed Front Panel
Assembly from step 4 to the
Hearth/Base (A). Make sure the dowels
are seated into the pre-drilled holes in
the Hearth/Base. Using Bolts (L) and
Washers (M) attach panels through
pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
8. Locate Left Side Panel (E), insert one
Wood Dowel (N) into each of the
pre-drilled holes.Then use Bolts (L) and
Washers (M) through the pre-drilled holes
in the mounting blocks. Attach the Side
Panel to Hearth/Base (A) and the
completed front assembly.
HAND TIGHTEN ONLY.
9. Locate Right Side Panel (F), insert one
Wood Dowel (N) into each of the
pre-drilled holes. Then use Bolts (L)
and Washers (M) through the pre-drilled
holes in the mounting blocks. Attach the
Side Panel to Hearth/Base (A) and the
completed front assembly.
HAND TIGHTEN ONLY.
E-3
Center Front
Panel
D
N
M
M
L
L
C
N
M
L
Completed
Front Panel
Assembly
L
F
Right
M
Side
Panel
N

Hearth/Base

N
A
N
N
M
M
L
L
B
N
Left
Side
Panel
N
N
E
N