Check Menu; Setting Menu - mundoclima MUENR-H7 Manual De Usuario E Instalacion

Press the " " and " " buttons to adjust the
parameter, and press the "OK" button to save
the setting and return to the previous
interface.
o. Setting temperature difference protection
of inlet and outlet water:
Select "TEMP. DIFFERENCE OF WATER
INLET AND OUTLET
VALUE", and press the "OK" button to enter
the interface. The interface display is as
follows:
SERVICE MENU
TEMP. DIFFERENCE OF WATER INLET
AND OUTLET PROTECTION VALUE
12 C
OK
Press the " " and " " buttons to adjust the
parameter, and press the "OK" button to
save the setting and return to the previous
interface.Press the "BACK" button to cancel
the setting and return to the previous
interface.

3.6 Setting MENU

Press the "MENU" button to enter the query
interface below:
PROTECTION
69

CHECK MENU

SELECT THE QUERING ADDRESS
OK
The user first uses the " " and " " buttons to
select the address of module to view (the
offline address is skipped automatically).
Press the "OK" button to access the
lower-layer submenu, or press "BACK" to go
back to the previous interface. During
operation on the menu page, press "BACK" to
go back to the previous interface.
After 0# main unit is selected, the system
enters the main unit operating status viewing
interface:
CHECK MENU
OPERATION
RUNNING
STATE
ON COOL
BACK
1/4
TOTAL
OUTLET
MODE
WATER
TEMP.
5 C