Publicidad
Idiomas disponibles
Idiomas disponibles
11. Turn blade by hand. If the blade binds
against the shield, or appears to be uneven,
the blade is not centered, and you must re-
NOTE:
install.
KNOW YOUR UNIT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Trimmer Head
Line Limiter
Blade
Blade
ON/STOP SWITCH
The ON/STOP switch is located on the trigger
handle and is used to stop the engine. To stop
the engine, push and release the engine
ON/STOP switch.
PRIMER BULB
The PRIMER BULB removes air from the car-
buretor and fuel lines and fills them with fuel.
This allows you to start the engine with fewer
pulls on the starter rope. Activate the primer
To remove blade, insert
OPERATION
Coupler
Shaft
Shield
Start
Lever
screwdriver into aligned holes. Unthread
the nut and remove parts. Be sure to store
parts and instructions for future use.
Spark Plug
ON/STOP
Switch
Handlebar
Primer Bulb
bulb by pressing it and allowing it to return to
its original form.
START LEVER
The START LEVER helps to supply fuel to the
engine to aid in starting. Activate the starting
system by moving the start lever to the START
position.
COUPLER
The COUPLER enables optional attach-
ments to be installed on the unit.
9
Throttle Trigger
Starter Handle
Muffler
Publicidad
