Installation; Auto Channel Scan (Retune) Menu Operation; Manual Tuning; Digital Manual Search - Saba SBV1943H Instrucciones De Manejo

Installation

Press MENU button on the remote control and
select Installation by using " " or " " button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan (Retune) by using
" "/" " button and press OK button. Automatic
Channel Scan (Retune) options will be displayed. You
can select Digital Aerial, Analogue or Digital Aerial-
Analogue tuning using " "/" " and OK buttons.
Auto Channel Scan (Retune) Menu
Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analogue and aerial
DVB stations.
• Whenever you select an automatic search type and
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using ." " or " " and
OK button.
• After auto channel scan type is set and selected
and confirmed, installation process will start and
progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation
menu by using " "/" " and OK buttons. Manual
Scan options screen will be displayed.
• Select the desired
" " button. Manual search options will change
accordingly. Use " "/" " button to highlight an item
and then press " " or " " button to set an option.
You can press MENU button to cancel.
Search Type using " " or

Digital Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital Aerial, you can
enter the multiplex or frequency number using the
numeric buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use
" "/" " button to highlight an item and then press "
" or " " button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Installation
menu by using " " or " " and OK buttons. Analogue
fine tune screen will be displayed. Analogue Fine
Tune feature will not be available if there are no
analog channels, digital channels and external
sources stored.
• Press OK button to proceed. Use " " or " " button
to set Fine Tune. When finished, press OK button
again.

First Time Installation

Select First Time Installation line and press OK button.
Enter the PIN number you have previously set during
the first time installation. If the correct PIN number is
entered, installation process will start.
See the section, "First Time Installation" at the
beginning of instruction book for more information
on the process.
English - 58 -