Using The Appliance - Profi Care PC-MPS 3016 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
NOTE:
Wash your hands and feet or apply lotion to them only after treatment.
1. Turn the appliance off by putting the switch of the drive unit into the "0" position.
2. Attach the required attachment. Remove / attach the attachments by simply slid-
ing them off or onto the shaft of the motor unit.
3. Turn on the appliance. The appliance features two speed settings for both the
clockwise and the anticlockwise rotation. Start with the low speed setting.
4. Gently run the attachment past the treatment area.
5. In order to prevent injuries, check the progress of the treatment continuously at
short intervals.
CAUTION:
• Do not immerse the appliance in water: the electronic components can be
damaged.
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
GB
• Always switch off the appliance before cleaning. Remove the batteries.
• Clean the attachments under running warm water.
• Clean the appliance with a slightly moist cloth. Make sure that no humidity or
waters seeps into the appliance!
• Dry the appliance well after cleaning with a dry and soft cloth.
• Use a disinfectant spray for hygienic cleaning.
• Clean the storage box with a slightly damp cloth.
Keep the appliance in a clean, dry place.
34
PC-MPS3016_IM

Using the Appliance

Cleaning
Storage
11.07.17

Publicidad

Tabla de contenido
loading

Tabla de contenido