Cleaning And Maintenance - HAEGER Work Force 20 Instrucciones De Uso

Operation
CAUTION:
Take note of the range limited by the length of the cable!
1. Insert plug into the supply socket. Press switch button, the machine begins to
work.
2. You can adjust the airflow by pushing the sliding block up and down.
Special instruction concerning protective device.
This vacuum cleaner is equipped with several protective devices.
1. When the barrel is full, the vacuum will lose suction and emit a noise to indicate
the motor is under strain. Turn off and unplug the vacuum cleaner immediately,
then empty the barrel and reassemble according to the instructions.
2. Should the vacuum cleaner be turned on its side, immediately turn the unit off.
Right the vacuum cleaner, then turn it on again.
3. If the vacuum cleaner loses suction or emits sounds, turn it off and empty the
barrel before continuing use.

Cleaning and Maintenance

WARNING:
Always remove the plug before cleaning.
–
Under no circumstances should you immerse the power head lid in
–
water in order to clean it. Otherwise this might result in an electric shock
or fire.
Do not use a wire brush or any abrasive items.
–
Do not use any acidic or abrasive detergents.
–
Instructions for use
English
7