Filter Bag Cleaning - HAEGER Work Force 20 Instrucciones De Uso

English
Barrel Cleaning
After use or when the barrel is full of dust which causes suction decreases
considerably, you should cut off the electricity and empty the barrel.
1. Unfasten the locking knob and remove the top cover.
2. Take off the filter bag and clean out the dust from the dust barrel.
3. Replace the filter bag and top cover and fasten the locking knob.

Filter bag cleaning

The filter bag should be washed by clean and warm water when it was covered
with dust. If necessary, you can use litmus less scour to wash.
1. Remove the filter
2. Gently wash in clean, warm water only.
3. Allow to dry completely
4. Reassemble.
NOTE:
Always allow the filters to dry in the open air!
–
Always resume operation with dry filters!
–
8
cloth filter
cloth filter
Instructions for use