Setting The Alarmvalues - Vetus MHWSD833 Instrucciones De Uso

7.2. Setting the alarmvalues

The alarmlevels must be enabled in the vetus.ini file. Otherwise the toolbar alarm enable
/ disable will not function. Individual settings for the windspeed and winddirection are
possible. The vetus.ini file is located in the directory in which the program was installed
(default C:\Program\Files\Vetus\Weatherstation).
Open the vetus.ini file with a text editor and go to the [interpreter] field.
[Interpreter]
display=-,1,1,1,0,0,0,0,0,Winddirection,0,0,0,0;
display=-,1,1,0,1,1,1,270,200,Wd(°),0,0,0,0;
display=-,4,2,1,0,0,0,0,0,Windspeed,12,12,3,0,0,12,Bft;
display=-,1,2,0,1,2,1,5,10,Ws(m/s),0,0,3,0;
display=-,5,2,1,0,0,0,0,0,Windspeed,0,0,5,0,m/s;
display=-,5,2,1,0,0,0,0,0,Windspeed,13,13,5,1,kts;
Change only the three values in bold italic typeface. The values are defined as follows:
1 value: Toggles alarm on (=1) and off (=0).
st
2 value: Minimum alarmlevel (270° and 5 m/s in the example)
nd
3 value: Maximum alarmlevel (200° and 10 m/s in the example)
rd
In case of the winddirection always think in the CW direction otherwise the wrong para-
meters will be set.
Note: Be sure to make a backup copy of the .ini file in case the original file becomes
corrupted!
20
100311.01
Weather station for MHWSD833