5/ Operation; Wintering Mode; Cleaning The Cell; Changing The Cell - cec C’El X Manual De Usuario

5/ MAINTENANCE
1
WINTERING
When the water temperature is less than 15°C, the chemical
conditions of the pool's water changes, provoking a very quick
diminution of the chlorine production and a premature wear of the
chlorinator cell. It's important you turn off (winter mode) the
chlorinator.
This device is supplied with an automatic winter mode that stops the
chlorine production.
Leave the cell in place during the winter and only proceed with a
chemical treatment.

CLEANING THE CELL

2
The auto-cleaning function prevents deposits of scale. However, in regions in which the water is
particularly hard, manual cleaning of the cell may be necessary from time to time.
Remove the cell and check for the presence of scale on the electrodes.
To descale the cell, use a cleaner « special cell » or contact your local retailer.
Connexions must
not be in the water
Cleaning solution
Rinse the cell and then reassemble it.
Readjust the inversion frequency (reduce) (see p.28).
3

CHANGING THE CELL

If the following message appears:
Remove the cell and replace it by a new original cell .
Be careful , chlorinator cells called « compatibles » do not guarantee the adequate functioning
of the device and can cause irreversible damage.
Reset the life cycle :
MENU
Settings
Options
Languages
3s Maintenance
≈
≈
CHANGE
YOUR CELL
MAINTENANCE
Start Up
Automatic Wintering
Cell change
31
≈
Titanium plates totally immerged
≈
Used cell changed for a
new one ?
3s
YES NO
DEVICE IN
WINTER MODE
The change of your cell
has been recorded.
Lifespan reset