Installing Your Freezer; Unpacking Your Freezer; Adjusting Your Freezer; Proper Air Circulation - Haier HNCMW035 Manual Del Usuario

English

Installing Your Freezer

Unpacking Your Freezer

1. Remove all packaging material. This includes the foam base and all
adhesive tape holding the freezer accessories inside and
outside.
2. Inspect and remove any remains of packing, tape or printed
materials before powering on the freezer.

Adjusting Your Freezer

It should not be recessed or built-in.
This could damage the compressor and the sealed system.
hours prior to plugging. This is to allow the refrigerant to settle.

Proper Air Circulation

was designed for, you should install it in a location where there
is proper air circulation, plumbing and electrical connections.
Sides...............4" (102mm)
Back..................4" (102mm)
5