Fault Finding; Requesting Service - Ebac SlimCool BN22 Serie Manual Del Usuario

Fault Finding

Always check the following before requesting service. Should a service call be requested and the cause found to be
detailed below a charge may be made.
1. No water dispensed from cooler
Check: The power supply is switched on.
The plug / socket / Fuse
The water bottle may be empty, replace with a new bottle.
2. Water does not appear to be chilled
Check: The power supply is switched on.
The plug / socket / Fuse

Requesting Service

If after following the above advice you still experience problems, please obtain the following information then contact
our service department.
1. Your name, address, postcode and telephone number
2. Where your Slim Cooler was purchased
3. Model & serial numbers ( these are located on the rating label inside the top of the unit)
4. Date of purchase.
DE ES FR GB 6