Assembly - Unold 28915 Instrucciones De Uso

DE

ASSEMBLY

EN
1. Place the housing of the coffee mill on a solid, level and dry work surface.
2. Place the collection container under the powder discharge.
FR
3. If the grinding bowl is not yet inserted, carefully place the grinding bowl in
NL
the middle of the bean container (Fig. 1). In this process ensure that the
silicone ring does not slip off of the grinding bowl. On the grinding bowl
IT
there are three protrusions that must be fitted into the respective apertures
in the housing.
ES
4. Place the bean container on the housing and lock the container in place. In
PL
this process pay attention to the arrow marks on the bean container and on
the housing (Fig. 2). The arrows must be precisely one above the other. This
is the only way that the coffee mill can be assembled and placed in service.
Now turn the bean container slightly to the left to lock in the container.
5. Ensure that there are no foreign objects in the grinding chamber.
6. The coffee mill can only be placed in service, if all parts are correctly assem-
bled. If all parts are not correctly assembled, a safety function prevents the
appliance from being switched on. Consequently, if the appliance does not
switch on, check all parts again.
Fig. 1
24 von 76
Copyright UNOLD AG | www.unold.de
Fig. 2
Stand 19.2.2020