EGO POWER+ NEXUS POWER STATION PST3040 Manual Del Operador página 23

OVERLOAD CONDITION
When the actual output power is over the rated power, the corresponding segment in
the overload indicator will illuminate in red. For example, for a 1400W device (over the
maximum capacity of 1200W), the available running time will display as invalid and
the corresponding overload indicator will shine in RED (Fig. 8). At the same time, the
reminder "PRESS AND HOLD RESET BUTTON", the warning indicator "
square contour around the USB/AC Icon will illuminate in red.
8
NOTICE:
The overload indicator is separated into 3 segments.
 The first segment will illuminate in red when the rated power is 600W and the
actual output power is over 600W;
 The first and second segments will illuminate in red when rated power is 1200W
and the actual output power is over 1200W;
 All of the three segments will illuminate in red when rated power is 2000W and
the actual output power is over the rated power (2000W continuous and 3000W
peak).
When an overload occurs, remove all devices and press and hold the reset button to
reactivate the Nexus power station.
OVERHEAT CONDITION
When the Nexus power station is overheated, the overheat icon will illuminate in red.
For example, if there are 4 batteries located on the Nexus power station, the rated
power is 2000W.
Contour of the USB/AC Icon
56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC
Third segment of the
overload indicator
First segment of the
overload indicator
" and the
Second segment of
the overload indicator
23