Instructions For Installation - Cata 07042311 m Instrucciones De Uso

Ocultar thumbs

Contenido

página de 73

/ 73
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Door type B

Open the door fully to position "D"

Lift the two mobile links "A" of the hinges, until fixing at

point "B".

Then close the door to the half-way position.

Next, lift the door upwards and remove it, sliding it out-

wards; hold the door by the sides close to the hinges when

doing this.

To replace the door, first slide the hinges into their grooves

and open the door completely.

Remember to turn the two moving links "B" used to engage

the two hinges before closing the door (Fig. X).

WARNING

• Take care not to remove the hinge locking system when

taking off the door, as the hinge mechanism can spring back

suddenly.

• Never submerge the door in water for any reason.

Door type C

Open the door and support it firmly.

Using a suitable screwdriver remove the lower hinge by the

part fixed to the oven.

Then remove the upper hinge from its place and take off

the door.

To replace the door, follow the same steps in reverse.

Oven accessories (Fig. 4)

The oven can be provided with lateral guides fitted to the

oven wall. Insert the grid and oven sheet provided on the

lateral guides. To remove the guides proceed as follows for

the two types:

Bars type 1

To remove the lateral guides press downwards at point A.

Bars type 2

To remove the lateral guides take out the screw using a sui-

table screwdriver, lift the bars upwards until they are free.