Maintenance, Cleaning And Care; Replacing The Batteries - Sportplus SP-HT-1003 Manual De Instrucciones

Ocultar thumbs Ver también para SP-HT-1003:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52
19. TROUBLESHOOTING - PROBLEMS WITH THE COMPUTER DISPLAY
No function values are displayed. Only the pulse display is working. This could mean
there is transmission interference between the home trainer and the computer. Check to
see that all cables are properly connected to one another and that none of the cables is
damaged.
The pulse display does not work anymore / always displays P. If all other computer
function values are being displayed, then the problem is either the hand sensor or the
cable connection between the sensor and the computer. Check to see that all cables are
properly connected to one another and that none of the cables is damaged.
TROUBLESHOOTING
Problem
Solution
No computer display
Replace the computer batteries with new batteries.
Incorrect computer
-
Check all cables leading to the computer.
display
-
Remove and reinsert batteries after one minute.
No pulse display ("P"
Check the cable connection leading to the handlebar.
shown in display).
Moisten your palms a little and clasp the contacts with
Pulse display data
equal force – measuring pulse data using the hand
imprecise.
contacts is less precise than measuring with a chest belt.
For precise measurements, use a pulse monitor watch.
38

20. MAINTENANCE, CLEANING AND CARE

After the assembly and before using the home trainer, always make sure that all
bolts/nuts are fully and correctly tightened.
Clean the unit regularly with a slightly damp cloth and a mild cleaning agent.
This is especially important for the seat and the handles, as these parts are in
constant contact with parts of your body during the entirety of training.
Empty batteries are hazardous waste — please dispose of them correctly, and do not
throw them away with normal household trash.
Should you wish to eventually dispose of the product, you should remove the batteries
from the computer and dispose of them separately as hazardous waste.

REPLACING THE BATTERIES:

If the display becomes dim, cuts out occasionally or if the pulse rate is no longer accurately
measured, the batteries are in need of replacement.
To do this, open the battery compartment cover on the back of the computer and insert
new batteries.
Two 1.5 V AAA batteries are required. Always replace all old batteries with new ones and
always heed correct polarity when inserting new batteries.
21. NOTES ON DISPOSAL
Packaging materials are raw materials and can be recycled. Separate the
packaging materials correctly and dispose of them properly in the interest of
the environment. Your local administration can provide additional information.
Used devices do not belong in household waste!
Dispose of used devices properly! Doing so helps fulfill our responsibility to
protect the environment. Your local administration can provide information on
collection points and opening hours.
Batteries do not belong in household waste!
As the end user, you are legally required to return discharged batteries to a
collection point. You can take your old batteries to the public collection points
in your community or you can take them to any place where batteries of that
type are being sold.
39

Publicidad

Tabla de contenido
loading

Tabla de contenido