Control Panel; Adjusting The Temperature; Parameter Setting - Buffalo CP829 Manual De Instrucciones

UK
Fitting the pan supports and water
trays
1. Place support bar on the ladder at the desired
height, mounting the rear end of the support
bar to the ladder first.
Ladders
2
Support bar
2. Repeat for the remaining support bars.
3. Slide the GN pans/shelves into place.
4. Fix the water trays as instructed below.
Square water tray Rectangular water tray
Directly push into the Hang onto the pre-
support brackets on mounted bolts on the
the underside of the interior back wall, ensuring
cabinet. it is fixed in place.
Brackets
4
CP829_ML_A5_v3_20190826.indb 4
1
Bolt Water tray
Operation

Control panel

The control panel is
located above the
door on the front of
the appliance.
Turn On
1. Put the food in and close the door.
2. Connect the appliance to a mains power supply.
3. Press and hold for 3 seconds.

Adjusting the Temperature

1. Press for 1 second. The set temperature will
flash.
2. Press the up button or down button
change the set temperature.
3. Wait 6 seconds for the set temperature to be
stored.

Parameter Setting

The operating parameters of this appliance have
been preset for optimum performance and to
maximise the life of the appliance.
The default value of set temperature is 75°C.
Para- Function
meter
PAS Password
E1 Lower setpoint
temperature
E2 Upper setpoint
temperature
E3 Temperature
hysteresis
E4 Time delay of
starting machine
E5 Temperature probe
adjustment
Cabinet
Temperature
Display
Fan On
Down button
On / Off button:
Press and hold for
3 seconds to switch
system on / off
Up Button
to
Range Default
0 ~ 100 15
25°C ~ SET 70°C
SET ~ 85°C 82°C
1°C ~ 10°C 4°C
1 ~ 8 min. 3 min.
-5°C ~ +5°C 0°C
2019/8/26 13:37