Attention
• The product is housed in an enclosure that meets IP64.
However, the ATEX/IECEx classified transceiver is not
intended to be immersed in dust or water.
• In the case of damage suspect, do not use the ATEX/IECEx
classified transceiver in a hazardous area.
• Make sure that the product marking corresponds to the site
requirements.
• Before installation consult the product documentation.
• National safety rules and regulations have to be observed.
• Do not use accessories to the product without ensuring that
they are suitable for use in a hazardous area.
• Modification of the product is not permitted.
• Product repair has to be done at authorised repair shops
only.
Regulatory compliance statements
EU/EFTA only
This equipment is intended to be used in the whole EU & EFTA.
This equipment is in compliance with the essential requirements
and other relevant provisions of R&TTE Directive 1999/51/EC.
The Declaration of Conformity may be consulted at:
http://www.ascom.com/ws/products_ws.htm
This equipment uses frequencies referring to different rules in
the various EU&EFTA countries.
A radio communication licence is in most cases neccessary for
the use of the equipment.
The frequencies required for operation of the radio equipment
must be notified and assigned prior to usage of the equipment.
12